Glossary entry (derived from question below)
English term or phrase:
back to back measurement
French translation:
mesure d'écartement entre faces internes des roues
Added to glossary by
Daniel Marquis
Apr 13, 2012 17:35
12 yrs ago
1 viewer *
English term
back to back measurement
English to French
Tech/Engineering
Mechanics / Mech Engineering
railways
Axles and bogies:
Examine back to back measurement with gauge at 3 points around the wheel at 120
intervals. Max 1362, min 1360. Maximum permissible out of true tolerance 1 mm.
(...)
Should the vehicle be derailed during its work cycle due to bad track twist, the only requirements are to visually inspect the axle, wheels, flanges and profile for damage, additionally the back to back must be checked to ensure the integrity of axle.
Examine back to back measurement with gauge at 3 points around the wheel at 120
intervals. Max 1362, min 1360. Maximum permissible out of true tolerance 1 mm.
(...)
Should the vehicle be derailed during its work cycle due to bad track twist, the only requirements are to visually inspect the axle, wheels, flanges and profile for damage, additionally the back to back must be checked to ensure the integrity of axle.
Proposed translations
(French)
| 4 +3 | mesure d'écartement entre faces internes des roues |
Daniel Marquis
|
| 4 | mesure successive |
GILLES MEUNIER
|
| 2 | mesures consécutives |
danièle davout
|
References
| Utilisation d'un calibre de mesure |
Daniel Marquis
|
Change log
Apr 27, 2012 11:19: Daniel Marquis Created KOG entry
Proposed translations
+3
30 mins
Selected
mesure d'écartement entre faces internes des roues
Voir la référence ci-dessous.
Cette mesure est effectuée en 3 points espacés de 120°.
--------------------------------------------------
Note added at 31 minutes (2012-04-13 18:06:43 GMT)
--------------------------------------------------
Extrait du document indiqué :
« Les écartements entre faces internes des roues étaient normaux... »
Cette mesure est effectuée en 3 points espacés de 120°.
--------------------------------------------------
Note added at 31 minutes (2012-04-13 18:06:43 GMT)
--------------------------------------------------
Extrait du document indiqué :
« Les écartements entre faces internes des roues étaient normaux... »
4 KudoZ points awarded for this answer.
Comment: "Selected automatically based on peer agreement."
1 min
mesure successive
-
--------------------------------------------------
Note added at 2 mins (2012-04-13 17:37:24 GMT)
--------------------------------------------------
The wheel set "back to back" measurement was within specified limits.tsb.gc.catsb.gc.ca La mesure successive des essieux montés respectait les limites prescrites.tsb.gc.catsb.gc.ca
--------------------------------------------------
Note added at 2 mins (2012-04-13 17:37:24 GMT)
--------------------------------------------------
The wheel set "back to back" measurement was within specified limits.tsb.gc.catsb.gc.ca La mesure successive des essieux montés respectait les limites prescrites.tsb.gc.catsb.gc.ca
6 hrs
mesures consécutives
mesures consécutives sur toute la longueur
Reference comments
24 mins
Reference:
Utilisation d'un calibre de mesure
En anglais, mais vous avez le détail de l'utilisation d'un genre de pied à coulisse servant à mesurer une dimension BACK-TO-BACK.
Bonne chance...
Bonne chance...
Something went wrong...